Hướng dẫn sử dụng Philips GC3240 Bàn ủi

Hướng dẫn sử dụng

◗ The auto-off light starts blinking to indicate that the iron has been

switched off by the safety shut-off function.

To let the iron heat up again, pick it up or move it slightly. The auto-off light

will go out.

- If the temperature light goes on, wait for it to go out before you start

ironing.

- If the temperature light does not go on, the iron is ready for use.

Cleaning and maintenance

.

After ironing

1 Remove the mains plug from the wall socket and let the iron cool down.

2 Clean the appliance with a damp cloth. Wipe any scale or deposits off

the soleplate with a non-abrasive (liquid) cleaner.

3 Empty the water tank after cleaning (fig. 12).

4 Leat the iron cool down. Wind the mains cord round the cord storage

facility and fix it with the cord clip.

5 Always store the iron standing on its heel in a safe and dry place (fig. 13).

Double-Active Calc System

The Double-Active Calc System guarantees a longer life for the iron.

◗ The anti-calc tablets prevent scale from clogging the steam vents. The

tablets are constantly active and do not need to be replaced (fig. 14).

◗ The Calc-Clean function helps remove scale particles. Use the Calc-

Clean function once every two weeks. If the water in your area is very

hard (i.e. when flakes come out of the soleplate during ironing), the

Calc-Clean function should be used more frequently.

1 Make sure the appliance is unplugged.

2 Set the steam control to position 0.

3 Fill the water tank to the maximum level.

Do not put vinegar or other descaling agents in the water tank.

4 Select the maximum ironing temperature.

5 Put the plug in the wall socket.

6 Unplug the iron when the temperature light has gone out.

7 Hold the iron over the sink, press and hold the Calc-Clean button and

gently shake the iron (fig. 15).

Steam and boiling water will come out of the soleplate. Impurities and flakes

(if any) will be flushed out.

8 Release the Calc-Clean button as soon as all the water in the tank has

been used up.

Repeat the Calc-Clean process if the iron still contains a lot of impurities.

After the Calc-Clean process

- Put the plug in the wall socket and let the iron heat up to allow the

soleplate to dry.

- Unplug the iron when the temperature light has gone out.

- Move the hot iron gently over a piece of used cloth to remove any water

stains that may have formed on the soleplate.

- Let the iron cool down before you store it.

Guarantee & service

.

If you need information or if you have a problem, please visit the Philips

website at www.philips.com or contact the Philips Customer Care Centre in

your country (you will find its phone number in the worldwide guarantee

leaflet). If there is no Customer Care Centre in your country, turn to your

local Philips dealer or contact the Service Department of Philips Domestic

Appliances and Personal Care BV.

Troubleshooting

.

This chapter summarises the most common problems you could encounter

with your iron. Please read the different sections for more details. If you are

unable to solve the problem, contact the Customer Care Centre in your

country.

Solution

Check the mains cord, the

plug and the wall socket.

Set the temperature dial

to the required position.

Fill the water tank (see

chapter 'Preparing for use').

Set the steam control to a

position between 1 and 4

(see chapter 'Using the

appliance').

Select an ironing

temperature that is

suitable for steam ironing

(2 to MAX). Put the

iron on its heel and wait

until the temperature light

has gone out before you

start ironing.

Continue ironing in

horizontal position and

wait a while before using

the (vertical) shot-of-

steam function again.

Select an ironing

temperature that is suitable

for steam ironing (2 to

MAX). Put the iron on its

heel and wait until the

temperature light has gone

out before you start

ironing.

Press the cap until you

hear a click.

Rinse the water tank and

do not put any additive in

the water tank.

Set the temperature dial to

a temperature suitable for

steam ironing (between

3 and MAX). Put the

iron on its heel and wait

until the temperature light

has gone out.

Use the Calc-Clean

function one or more

times (see chapter

'Cleaning and

maintenance').

Move the iron slightly to

deactivate the safety shut-

off function. The light goes

out.

Empty the water tank and

set the steam control to

position 0 after use. Store

the iron on its heel.

Possible cause

There is a connection

problem.

The temperature dial has

been set to MIN.

There is not enough water

in the water tank.

The steam control has

been set to position 0.

The iron is not hot enough

and/or the drip-stop

function has been

activated.

The (vertical) shot-of-

steam function has been

used too often within a

very short period.

The iron is not hot

enough.

The cap of the filling

opening has not been

closed properly.

An additive has been

poured into the water

tank.

The iron is not hot

enough.

Hard water forms flakes

inside the soleplate.

The safety shut-off function

has switched the iron off

(see chapter 'Features').

The iron has been put in

horizontal position with

water still left in the water

tank.

Problem

The iron is plugged in but

the soleplate is cold.

No steam.

No shot of steam or no

vertical shot of steam.

Water droplets drip onto

the fabric.

Flakes and impurities come

out of the soleplate during

ironing.

The light blinks (type

GC3260 only).

Water drips from the

soleplate after the iron has

cooled down or has been

stored.

4239 000 59323

3/10

Định giá

Thông tin thêm về hướng dẫn này

Chúng tôi hiểu rằng thật tuyệt khi có sách hướng dẫn bằng giấy cho Philips GC3240 Bàn ủi của bạn. Bạn luôn có thể tải xuống hướng dẫn sử dụng từ trang web của chúng tôi và tự in. Nếu bạn muốn có sách hướng dẫn gốc, chúng tôi khuyên bạn nên liên hệ với Philips. Họ có thể cung cấp hướng dẫn gốc. Bạn đang tìm kiếm hướng dẫn sử dụng Philips GC3240 Bàn ủi của mình bằng ngôn ngữ khác? Chọn ngôn ngữ ưa thích của bạn trên trang chủ của chúng tôi và tìm kiếm số kiểu máy để xem chúng tôi có sẵn ngôn ngữ đó không.

Thông số kỹ thuật

Tất cả hướng dẫn sử dụng cho Philips Bàn ủi
Thêm hướng dẫn sử dụng của Bàn ủi

Câu hỏi thường gặp về Philips GC3240 Bàn ủi

Đội ngũ hỗ trợ của chúng tôi sẽ tìm kiếm thông tin sản phẩm hữu ích và trả lời cho những câu hỏi thường gặp. Nếu bạn nhận thấy có sự không chính xác trong các câu hỏi thường gặp của chúng tôi, hãy cho chúng tôi biết bằng cách dùng biểu mẫu liên hệ.

Những sảm phẩm tương tự

Hướng dẫn sử dụng

Philips GC2115 Bàn ủi

Hướng dẫn sử dụng

Philips GC8702 Bàn ủi

Hướng dẫn sử dụng

Philips GC9655 PerfectCare Elite Silence Bàn ủi

Hướng dẫn sử dụng

Philips DST7041 Bàn ủi

Hướng dẫn sử dụng

Philips GC9330 Bàn ủi

Hướng dẫn sử dụng

Philips GC9642 Bàn ủi

Hướng dẫn sử dụng

Philips GC7051 Bàn ủi

Hướng dẫn sử dụng

Philips GC7808 Bàn ủi

Thể loại liên quan