Hướng dẫn sử dụng Philips PQ216 Máy cạo râu

Hướng dẫn sử dụng

, The charging light goes on to indicate that

the appliance is charging (Fig. 5).

4 Remove the shaver from the wall socket

when the battery is fully charged.

5 Press the release button (1) and fold the

foldable plug back into the appliance (2)

(‘click’) (Fig. 6).

Note: The light on the shaver does not change colour

and does not go out when the shaver is fully charged.

Cordless shaving time

A fully charged shaver has a cordless shaving

time of approximately 30 minutes.

Using the appliance

The shaver cannot be used directly from the

mains.

1 Remove the protection cap.

2 Push the on/off slide upwards to switch on

the shaver (Fig. 7).

3 Move the shaving heads over your skin. Make

both straight and circular movements (Fig. 8).

Note: Shave on a dry face only. Do not use the

shaver in combination with gel, foam or water.

Note: Your skin may need 2 or 3 weeks to get

accustomed to the Philips shaving system.

4 Push the on/off slide downwards to switch off

the shaver.

5 Clean the shaver after every shave, see

chapter ‘Cleaning and maintenance’.

6 Put the protection cap on the shaver after

use to prevent damage and to avoid dirt

accumulation in the shaving heads (Fig. 9).

Cleaning and maintenance

Never use scouring pads, abrasive cleaning

agents or aggressive liquids such as petrol or

acetone to clean the appliance.

Clean the shaver after every shave to guarantee

better shaving performance. For the best cleaning

result, we advise you to use Philips Cleaning Spray.

Ask your Philips dealer for information.

After every shave: shaving unit and

hair chamber

1 Switch off the shaver.

2 Clean the top of the appliance with the

cleaning brush supplied (Fig. 10).

3 Pull the shaving unit straight up off the

shaver (Fig. 11).

4 Clean the inside of the shaving unit with the

cleaning brush (Fig. 12).

5 Clean the hair chamber with the cleaning

brush (Fig. 13).

6 Put the shaving unit back onto the

shaver (Fig. 14).

ENGLISH

Introduction

Congratulations on your purchase and welcome

to Philips! To fully benet from the support

that Philips offers, register your product at

www.philips.com/welcome.

General description (Fig. 1)

1 Protection cap

2 Shaving heads

3 Shaving unit

4 Hair chamber

5 On/off slide

6 Front panel

7 Charging light

8 Foldable plug

9 Release button of foldable plug

10 Retaining frame

11 Central spring of retaining frame

12 Cutter

13 Guard

14 Philips Cleaning Spray (Optional)

15 Cleaning brush

Important

Read this user manual carefully before you use the

appliance and save it for future reference.

Danger

- Keep the appliance dry.

- This symbol means: Forbidden to clean under

a running tap (Fig. 2).

Warning

- This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they

have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety.

- Children should be supervised to ensure that

they do not play with the appliance.

Caution

- Use and store the appliance at a temperature

between 5°C and 35°C.

- Only use the cleaning brush supplied.

- Make sure the cleaning brush remains clean.



This Philips appliance complies with all standards

regarding electromagnetic elds. If handled

properly and according to the instructions in this

user manual, the appliance is safe to use based on

scientic evidence available today.

Charging

Charge the appliance when the motor stops or

starts running slower.

When you charge the shaver for the rst time

or after a long period of disuse, let it charge

continuously for 12 hours. Charging normally takes

approx. 8 hours.

Do not leave the appliance connected to the

mains for more than 24 hours.

1 Switch off the shaver before you start

charging it.

2 Press the release (1) button and fold out the

foldable plug (2) (‘click’) (Fig. 3).

3 Insert the foldable plug unit into the wall

socket (Fig. 4).

Every two months: shaving heads

Note: Do not use cleaning agents or alcohol to clean

the shaving heads. Only use Philips Cleaning Spray.

1 Switch off the shaver.

2 Pull the shaving unit straight up off the

shaver (Fig. 15).

3 To remove the retaining frame, turn the

central spring clockwise (1).Then lift

the retaining frame out of the shaving

unit (2) (Fig. 16).

4 Lift the shaving heads out of the shaving unit.

Remove and clean one shaving head at a

time. Each shaving head consists of a cutter

and a guard (Fig. 17).

Note: Do not clean more than one cutter and

guard at a time, since they are matching sets. If

you accidentally mix up the cutters and guards, it

may take several weeks before optimal shaving

performance is restored.

5 Remove the guard from the cutter (Fig. 18).

6 Clean the cutter with the short-bristled side

of the cleaning brush. Brush carefully in the

direction of the arrows (Fig. 19).

7 Clean the guard with the long-bristled side of

the cleaning brush (Fig. 20).

8 Put the cutter back into the guard after

cleaning (Fig. 21).

9 Put the shaving heads back into the shaving

unit (Fig. 22).

10 Put the retaining frame back into the shaving

unit (1), and turn the central spring anti

clockwise (2) (Fig. 23).

11 Put the shaving unit back onto the

shaver (Fig. 14).

Storage

Keep the appliance dry.

Use and store the appliance at a temperature

between 5°C and 35°C.

1 Switch off the shaver.

2 Put the protection cap on the shaver after

use to prevent damage and to avoid dirt

accumulation in the shaving heads (Fig. 9).

Replacement

Replace the shaving heads every two years for

optimal shaving results.

Replace damaged or worn shaving heads with

Philips shaving heads only (HQ4 for China or

HQ56 for the rest of the world).

For instructions on how to remove the shaving

heads, see chapter ‘Cleaning and maintenance’,

section ‘Every two months: shaving heads’.

Accessories

To retain top performance of your shaver, make

sure you clean it regularly and replace its shaving

heads at the recommended time.

Shaving heads

- We advise you to replace your shaving heads

every two years. Always replace them with

Philips shaving heads only (HQ4 for China or

HQ56 for the rest of the world) (Fig. 24).

PQ216

Register your product and get support at

www.philips.com/welcome

4222.002.5463.1

1

2

3 4

5

6 7

8 9

10

11

12 13

14

15 16

17

18 19

20 21

22

23

24 25

26

27 28

Định giá

Thông tin thêm về hướng dẫn này

Chúng tôi hiểu rằng thật tuyệt khi có sách hướng dẫn bằng giấy cho Philips PQ216 Máy cạo râu của bạn. Bạn luôn có thể tải xuống hướng dẫn sử dụng từ trang web của chúng tôi và tự in. Nếu bạn muốn có sách hướng dẫn gốc, chúng tôi khuyên bạn nên liên hệ với Philips. Họ có thể cung cấp hướng dẫn gốc. Bạn đang tìm kiếm hướng dẫn sử dụng Philips PQ216 Máy cạo râu của mình bằng ngôn ngữ khác? Chọn ngôn ngữ ưa thích của bạn trên trang chủ của chúng tôi và tìm kiếm số kiểu máy để xem chúng tôi có sẵn ngôn ngữ đó không.

Thông số kỹ thuật

Tất cả hướng dẫn sử dụng cho Philips Máy cạo râu
Thêm hướng dẫn sử dụng của Máy cạo râu

Câu hỏi thường gặp về Philips PQ216 Máy cạo râu

Đội ngũ hỗ trợ của chúng tôi sẽ tìm kiếm thông tin sản phẩm hữu ích và trả lời cho những câu hỏi thường gặp. Nếu bạn nhận thấy có sự không chính xác trong các câu hỏi thường gặp của chúng tôi, hãy cho chúng tôi biết bằng cách dùng biểu mẫu liên hệ.

Những sảm phẩm tương tự

Hướng dẫn sử dụng

Philips RQ1295 Máy cạo râu

Hướng dẫn sử dụng

Philips HS8040 Máy cạo râu

Hướng dẫn sử dụng

Philips HQ8170 Máy cạo râu

Hướng dẫn sử dụng

Philips HQ8150 Máy cạo râu

Hướng dẫn sử dụng

Philips HQ8200 Máy cạo râu

Hướng dẫn sử dụng

Philips HQ8290 Máy cạo râu

Hướng dẫn sử dụng

Philips HQ9090 Máy cạo râu

Hướng dẫn sử dụng

Philips QP2620 OneBlade Máy cạo râu

Thể loại liên quan