Hướng dẫn sử dụng Philips GC1110 Bàn ủi

Hướng dẫn sử dụng

ENGLISH

General description (fig. 1)

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

A Temperature control dial

B Steam control dial

O = no steam

q = moderate steam

w = maximum steam

x = Calc-Clean function

C Spray button T (types GC1121, GC1120, GC1115 and GC1015)

D Spray nozzle (types GC1121, GC1120, GC1115 and GC1015)

E Temperature pilot light

F Water filling opening

G Water tank

H Type plate

I Cord

J Extra Steam function (press steam control dial) (type GC1121 and GC1120)

Important

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

◗ For optimal safety, read these instructions carefully and look at the illustrations

before you start using the appliance.

◗ Keep these instructions for future reference.

◗ Never leave the iron unattended when it is connected to the mains.

◗ This appliance is not intended for use by children.

◗ Keep an eye on children to make sure that they do not play with the appliance.

◗ The soleplate of the iron can become extremely hot and may cause burns if

touched.

◗ Never use the appliance if it is damaged in any way.

◗ When you have finished ironing, when you clean the appliance, when you fill or

empty the water tank and also when you leave the iron even for a short while:

set the steam control to position O, put the iron on its heel and remove the

mains plug from the wall socket.

◗ If the supply cord is damaged, it must be replaced by a special cord or assembly

available from Philips or a service agent.

◗ Check if the voltage indicated on the type plate corresponds to the local mains

voltage before you connect the appliance.

Before first use

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

1 Remove sticker or protective foil from the soleplate if there is any.

2 Heat up the iron to the maximum temperature and pass the iron over a piece

of damp cloth for several minutes to remove any residues from the soleplate.

The iron may give off some smoke when you use it for the first time.This will cease

after a short while.

Filling the water tank

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

Never immerse the iron in water.

1 Remove the mains plug from the wall socket.

2 Set the steam control to position O (= no steam) (fig. 2).

3 Tilt the iron backwards.

4 Fill the water tank with cold tap water up to the maximum level (fig. 3).

Do not fill the water tank beyond the MAX indication.

Only use water. Do not use vinegar, starch, ironing concentrates or chemically

descaled water.

If the tap water in your area is very hard, we advise you to mix it with an equal

amount of distilled water or to use distilled water only.

Setting the temperature

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

1 Put the iron on its heel.

2 Check the garment label for the required ironing temperature:

1 Synthetic fabrics (e.g. acrylic, viscose, polyamide, polyester)

1 Silk

2 Wool

3 Cotton, linen

If you do not know what kind of fabric(s) a garment is made of, determine the right

ironing temperature by ironing a part that will be invisible when you wear the

garment.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent

shiny patches. Avoid using the spray function to prevent stains.

Start ironing the articles that require the lowest ironing temperature, such as those

made of synthetic fibres.

3 Set the temperature control dial to the required ironing temperature by

turning it to the appropriate temperature indication (fig. 4).

4 Put the mains plug in an earthed wall socket.

5 When the temperature pilot light has gone out, wait a while before you start

ironing (fig. 5).

The pilot light will go on from time to time during ironing.

Steam ironing

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

1 Make sure that there is enough water in the water tank.

2 Set the temperature control dial to the recommended position.

See 'Setting the temperature'.

3 After the temperature pilot light has gone out, set the steam control to the

appropriate steam position (fig. 6).

q for moderate steam (temperature settings 2 to MAX)

w for maximum steam (temperature settings 3 to MAX)

The iron will start producing steam as soon as the set temperature has been

reached.

Ironing without steam

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

1 Set the steam control dial to position O (= no steam).

2 Set the temperature control dial to the recommended position.

See 'Setting the temperature'.

Other features

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

Spray function (Types GC1121, GC1120, GC1115, and GC1015).

To remove stubborn creases at any temperature

◗ Make sure there is enough water in the water tank.

1 Press the spray button several times to moisten the article to be ironed (fig. 7).

Extra Steam (Type GC1121 and GC1120).

This function provides extra steam to remove very stubborn creases.

◗ The Extra Steam function only works at temperature settings between 3

and MAX.

1 Set the steam control dial to the maximum position w (fig. 8).

2 Press and hold the steam control dial for maximal 5 seconds (fig. 9).

3 Release the steam control dial and wait at least 1 minute before using this

function again to prevent water from dripping out of the soleplate.

Cleaning and maintenance

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

Calc-Clean function

The Calc-Clean function removes scale and impurities.

Use the Calc-Clean function once every two weeks. If the water in your area is very

hard (i.e. when flakes come out of the soleplate during ironing), you should use the

Calc-Clean function more frequently.

1 Set the steam control dial to position O.

2 Set the temperature control dial to MAX.

3 Fill the water tank to the maximum level.

Do not pour vinegar or other descaling agents into the water tank.

4 Put the plug in the wall socket.

5 Unplug the iron when the temperature pilot light has gone out.

6 Hold the iron over the sink and set the steam control to the Calc-Clean

position x (fig. 10).

7 Pull the steam control dial slightly upwards and gently shake the iron until all

water in the tank has been used up.

Steam and boiling water will come out of the soleplate, flushing out impurities and

scale.

8 Press the steam control dial back to its original position and set it to position

O after having used the Calc-Clean function.

9 Repeat the Calc-Clean process if the iron still contains a lot of impurities.

10 To clean the steam control needle, pull the steam control out of the appliance

(fig. 11). Use vinegar to remove scale, if any, from the needle (fig. 12).

Do not bend or damage the steam control needle.

11 Reinsert the steam control needle by placing the point of the needle exactly

in the centre of the hole and by fitting the small projection on the side of the

needle into the slot (fig. 13).

12 Set the steam control to position O.

After the Calc-Clean process

1 Connect the iron to the mains to let the soleplate dry.

2 Unplug the iron when the pilot light has gone out.

3 Move the iron gently over a piece of used cloth to remove any water stains

that may have formed on the soleplate.

4 Let the iron cool down before you store it.

Cleaning after ironing

1 Make sure the plug has been removed from the wall socket and the iron has

cooled down.

2 Wipe scale and any other deposits off the soleplate with a damp cloth and a

non-abrasive (liquid) cleaner.

Keep the soleplate smooth: avoid contact with metal objects.

3 Clean the upper part of the appliance with a damp cloth.

4 Regularly rinse the water tank with water. Empty the water tank after

cleaning.

Storage

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

1 Make sure the plug has been removed from the wall socket and the iron has

cooled down. Set the steam control to position O.

2 Empty the water tank (fig 14).

3 Wind the mains cord round the cord storage facility.

4 Store the iron standing on his heel in a safe and dry place (fig. 15).

Information & service

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

If you need information or if you have a problem, please visit the Philips Web site at

www.philips.com or contact the Philips Customer Care Centre in your country (you

will find its phone number in the worldwide guarantee leaflet). If there is no

Customer Care Centre in your country, turn to your local Philips dealer or contact

the Service Department of Philips Domestic Appliances and Personal Care BV.

Troubleshooting

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

This chapter summarises the most common problems you could encounter with

your iron. Please read the different sections for more details. If you are unable to

solve the problem, please contact the Philips Customer Care Centre in your country.

You can find its telephone number in the worldwide guarantee leaflet.

Comfort

GC1121, GC1120, GC1115, GC1110, GC1015, GC1010

Solution(s)

Check if the plug is connected to

the wall socket properly.

Set the temperature control dial to

the required temperature.

Fill the water tank (see 'Filling the

water tank').

Set the steam control dial to

position q or w (see 'Steam

ironing').

Set the temperature control dial to

a temperature suitable for steam

ironing (2 to MAX). Put the iron

on its heel and wait until the pilot

light has gone out before you start

ironing.

Press and hold the steam control

dial for maximal 5 seconds.

Wait at least 1 minute before using

the Extra Steam function again.

Set the temperature control dial to

a temperature between 3 and

MAX. Put the iron on its heel and

wait until the pilot light has gone

out.

Possible cause(s)

There is a connection

problem.

The temperature

control dial has been

set to MIN.

There is not enough

water in the water

tank.

The steam control dial

has been set to

position O.

The iron is not hot

enough.

The steam control dial

has not been pressed

long enough.

The Extra Steam

function has been

used too often in a

short period.

The iron is not hot

enough.

Problem

The iron is plugged in

but the soleplate is

cold.

The iron does not

produce any steam.

The Extra Steam

function does not

work (type GC1121

and GC1120)

Solution(s)

Fill the water tank (see 'Filling the

water tank').

Set the temperature control dial to

a temperature between 3 and

MAX. Put the iron on its heel and

wait until the pilot light has gone

out.

Wait at least 1 minute before using

the Extra Steam function again

(see 'Extra Steam').

Fill the water tank (see 'Filling the

water tank').

Use the Calc-Clean function a few

times (see 'Calc-Clean').

Set the temperature control dial to

a temperature suitable for steam

ironing (2 to MAX). Put the iron

on its heel and wait until the pilot

light has gone out before you start

ironing.

Empty the water tank and set the

steam control to position O

before storing the iron (see

'Storage'). Place the iron on its

heel.

Possible cause(s)

There is not enough

water in the water

tank.

The iron is not hot

enough.

The Extra Steam

function has been

used too often in a

short period.

There is not enough

water in the water

tank.

You have been using

hard water, which has

caused scale flakes to

develop inside the

soleplate.

The set temperature

is too low.

The iron has been put

in horizontal position

while there is still

water in the water

tank.

Problem

Water leaks from the

soleplate when I use

the Extra Steam

function (type

GC1120)

The spray function

does not work (types

GC1121, GC1120,

GC1115 and

GC1015)

Flakes and impurities

come out of the

soleplate during

ironing.

Water leaks from the

soleplate during

ironing.

Water leaks from the

soleplate while the

iron is cooling down

or after it has been

stored.

4239 000 52271

u

Định giá

Thông tin thêm về hướng dẫn này

Chúng tôi hiểu rằng thật tuyệt khi có sách hướng dẫn bằng giấy cho Philips GC1110 Bàn ủi của bạn. Bạn luôn có thể tải xuống hướng dẫn sử dụng từ trang web của chúng tôi và tự in. Nếu bạn muốn có sách hướng dẫn gốc, chúng tôi khuyên bạn nên liên hệ với Philips. Họ có thể cung cấp hướng dẫn gốc. Bạn đang tìm kiếm hướng dẫn sử dụng Philips GC1110 Bàn ủi của mình bằng ngôn ngữ khác? Chọn ngôn ngữ ưa thích của bạn trên trang chủ của chúng tôi và tìm kiếm số kiểu máy để xem chúng tôi có sẵn ngôn ngữ đó không.

Thông số kỹ thuật

Tất cả hướng dẫn sử dụng cho Philips Bàn ủi
Thêm hướng dẫn sử dụng của Bàn ủi

Câu hỏi thường gặp về Philips GC1110 Bàn ủi

Đội ngũ hỗ trợ của chúng tôi sẽ tìm kiếm thông tin sản phẩm hữu ích và trả lời cho những câu hỏi thường gặp. Nếu bạn nhận thấy có sự không chính xác trong các câu hỏi thường gặp của chúng tôi, hãy cho chúng tôi biết bằng cách dùng biểu mẫu liên hệ.

Những sảm phẩm tương tự

Hướng dẫn sử dụng

Philips GC9324 Bàn ủi

Hướng dẫn sử dụng

Philips GC4430 Bàn ủi

Hướng dẫn sử dụng

Philips GC9640 Bàn ủi

Hướng dẫn sử dụng

Philips GC7805 Bàn ủi

Hướng dẫn sử dụng

Philips GC6740 Bàn ủi

Hướng dẫn sử dụng

Philips GC9682 PerfectCare Elite Plus Bàn ủi

Hướng dẫn sử dụng

Philips GC8641 Bàn ủi

Hướng dẫn sử dụng

Philips GC7920 Bàn ủi

Thể loại liên quan