Hướng dẫn sử dụng Malloca MOV-659 PGR Lò nướng

Hướng dẫn sử dụng

accordance with the wiring rules.

 If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard.

 Do not use harsh abrasive cleaners or sharp metal scrapers to clean the

oven door glass since they can scratch the surface, which may result in shattering

of the glass.

 Only use the temperature probe recommended for this oven.

 Under the conditions of the pyrolytic cleaning the surfaces may be get

hotter than usual, children should be kept away.

 Excess spillage must be removed before cleaning.(For pyrolytic self-clean-

ing ovens.)

 During pyrolytic cleaning, accessible parts may become hotter than normal.

Young children should be kept away. (For pyrolytic self-cleaning ovens.)

 A steam cleaner is not to be used.

 The appliances are not intended to be operated by means of an external

timer or separate remotecontrol system.

 The instructions for ovens that have shelves shall include details indicating

the correct installations of the shelves.

SAFETY HINTS

 Do not use the oven unless you are wearing something on your feet. Do not

touch the oven with wet or damp hands or feet.

 For oven: Oven door should not be opened often during the cooking period.

 The appliance must be installed by an authorized technician and put into

use. The producer is not responsible for any damage that might be caused by defec-

tive placement, and installation by unauthorized personnel.

 When the door or drawer of oven is open do not leave anything on it, you

may unbalance your appliance or break the door.

 Some parts of appliance may keep its heat for a long time; it is required to

wait for it to cool down before touching onto the points that are exposed to the heat

directly.

 If you will not use the appliance for a long time, it is advised to plug it off.

FITTING THE OVEN INTO THE KITCHEN UNIT

Fit the oven into the space provided in the kitchen unit; it may be fitted underneath

a work top or into an upright cupboard. Fix the oven in position by screwing into

place, using the two fixing holes in the frame. To locate the fixing holes, open the

oven door and look inside. To allow adequate ventilation, the measurements and

distances adhered to when fixing the oven.

IMPORTANT

If the oven is to work properly, the kitchen housing must be suitable. The panels of

the kitchen unit that are next to the oven must be made of a heat resistant material.

Ensure that the glues of units that are made of veneered wood can with stand

temperatures of at least 120 ºC. Plastics or glues that cannot withstand such

temperatures will melt and deform the unit, once the oven has been lodged inside

the units, electrical parts must be completely insulated. This is a legal safety require-

ment. All guards must be firmly fixed into place so that it is impossible to remove

them without using special tools. Remove the back of the kitchen unit to ensure an

adequate current of air circulates around the oven. The hob must have a rear gap of

at least 45 mm.

DECLARATION OF COMPLIANCE

When you have unpacked the oven, make sure that it has not

been damaged in any way. If you have any doubts at all, do not

use it: contact a professionally qualified person. Keep packing

materials such as plastic bags, polystyrene, or nails out of the

reach of children because these are dangerous to children.

PRODUCT DESCRIPTION

OPERATION INSTRUCTIONS

1. Clock Setting

After connectiong the unit to the power, the symbols "0:00" will be visible

on the display.

1. Press " ", the hour gures will ash.

2. Rotate "K2" to adjust the hour gures, (Time should be within

0--23).

3. Press " ", the minutes will ash.

4. Rotate "K2" to adjust the minutes setting, (time should be within

0-59).

5. Press " " to nish the clock settings. ":" will ash, and the time

will be illuminated.

Note: The clock is 24 hours. After power on, if not set, the clock will

show "0:00".

2. Function Setting

1. Rotate "K1" to choose the cooking function you require .The

related symbol will illuminated .

2. Rotate "K2" to adjust the temperature.

3. Press " " to conrm the start of cooking.

4. If step 2 is ignored, Press " " to conrm the start of cooking.

and the default time is 9 hours, the default temperature will display on

the LED.

NOTE:

1. The step quantities for the adjustment time of the knobs are as

follow: 0--0:30min: step 1 minute 0:30--9:00hour :step 5 minutes

2. The step quantities for the adjustment of temperature is 5

ºC,

and the grill function is 30

ºC

3. Rotate "K1" to adjust the cooking time when cooking begins.

Then press " " to start cooking.

If " " not pressed within 3 seconds,the oven will revert back to the previ-

ous time to continue cooking.

4. Rotate"K2" to adjust the temperature when cooking begins.The

related indicator will be illuminated. Then press " " to start cooking. If

" " not pressed in 3seconds, the oven will revert back to the previous

temperatrue to continue cooking.

3. Lamp Setting

1. Rotate"K1" to select the relevant function, then the correspond-

ing icon will be on.

2. Press " " button to start, "0:00" and lamp icon " " will light

up, " : " will ash.

4. Inquiring function

During cooking process, you can use inquiring function, after 3 seconds

return to the current working state.

1. During cooking mode, press " " button to see the current time.

2. If the reminder function was set, press " "button to see the

current time.

5. Child lock function

To Lock : press " " and " " simultaneously for 3 seconds, there

will be a long "beeping" sound and the " " will be illuminated.

Lock quitting : press " " and " " simultaneously for 3 seconds,

there will be a long "beeping" sound indicating the child-lock is released.

Note: During working mode, if you want to stop cooking, press stop

button quickly. Do not need to long pressing on stop button,it is invalid.

6. Reminder Function:

The oven has 9 hours reminder, this function will help to remind you to

start cooking in a certain time from 1 minute to 9 hours. Only when oven

in standby mode, the reminder can be set. Follow below to set the

reminder:

1.Press reminder setting button " ";

2.Rotate " K2 " to set the hour time of reminder. (Time should be

within 0--9).

3.Press reminder setting button " " again;

4.Rotate "K2 " to set minute time of reminder. (Time should be

within 0--59).

5.Press " " to conrm setting. The time will count down.

Note: The oven buzzer will sound for 10 times after the time back to the

zero hour . " " symbol disappears on the screen to remind you to start

cooking. You can cancel the reminder during setting by pressing the stop

button; After the reminder has been set, you can cancel it by pressing

stop button twice.

7. Start/Pause/Cancel Function

1.If the cooking time has been set, press " " to start cooking. If the

cooking is paused, press " " to resume cooking.

2.During cooking process, press " " once to pause the cooking.

Press " " twice to cancel the cooking.

8. Energy-Saving Function

1.During in waiting state and reminding state , press " " for three

seconds, the LED display will go o and set to energy-saving mode.

2.If no operation in 10 minutes under waiting state, the LED

display will go o and go into energy-saving mode.

3.Under the energy-saving mode, press any key or rotate any knob

can quit the energy-saving mode.

9. Pyrolytic Function

This function allows you to clean thoroughly the oven cavity.

1.Rotate "K1" to select the pyrolytic function. LED will display

"PYA".

2.Press " " to conrm the cooking. And the default time is 2

hours, "PYA" will display on the LED.

3.Rotate "K1" to change the pyrolytic time. There have two leve

time can be selected "1:30 or 2:00".

Note:

-When the oven door is not closed, press start button will be inval-

id, LED will display "DOOR", "PYA". Press cancel button then return to

waiting state.

- When the oven center temperature is highter than 300 C,Press

cancel button can return to waiting state directly, press start botton, LED

will display "DOOR". Press cancel button then return to waiting state.

- When the pyrolytic function nished working and oven center

temperature is lower than 300 C. LED display will go o.

- Before activating the pyrolytic cleaning function, remove any

excessive spillage and make sure that oven is empty. Do not leave

anything inside it(e.g. pans, baking tray, dripping pan, slider bracket etc.)

as this could heavily damage them.

10.Reservation function

1.To use reservation function, clock must be set in advance. Then,

in the way of setting the clock, reserved time must be set (a> Press reser-

vation setting button " "; b> Rotate "K2" to set the hour time of reserva-

tion. Time should be within 0--9. c> Press reservation setting button " "

again; d> Rotate "K2" to set minute time of reservation. Time should be

within 0--59.), but don't press clock this time. Next, turn knob "K1" to

chosse function.

2.Press " " button to set cooking time and temperature. Then

turn knob "K1" to adjust time, and " K2 " to adjust temperature.

3.Press the " " button to nish cooking setting, and the clock will

be on the screen with reservation sign " " always lighting. But no other

function signals are presented. Reservation time can be checked

by pressing " ", 3 seconds later the screen will show clock again.

4.At the time of reservation, cooking will start automatically after a

buzzing sound. The reservation symbol will put out, and other indicating

signs will work normally.

Note:

- Lamp, defrost can't be reserved.

- During the status of reservation, press cancel button once, time

and temperature of reservation menu will be shown with menu icon

lighting constantly. Press again, screen returns to clock, or press start

button to return to reservation status.

- Reminder function is invalid during reservation status.

11. Note

1.The oven lamp will be on for all functions.(except pyrolytic func-

tion)

2.Once the cooking programme has been set and the " " button

is not pressed within 5 minutes, the current time will be displayed or turn

back to waitting state. The setting program will be invalid.

3.The buzzer sounds when eectively pressed, if not eectively

pressed there will be no response.

4.The buzzer will sound ve times to remind you when cooking

has nished.

CLEANING AND MAINTENANCE

For the sake of a good appearance and reliability, keep the unit clean. The

modern design of the unit facilitates maintenance to a minimum. The

parts of the unit which come into contact with food have to be cleaned

regularly.

- Before any maintenance and cleaning, disconnect the power. Set

all controls in the OFF position.

- Wait until the inside of the unit is not hot but only slightly warm-

cleaning is easier than when warm.

- Clean the surface of the unit with a damp cloth, soft brush or ne

sponge and then wipe dry.

- In case of heavy soiling, use hot water with non- abrasive clean-

ing product.

- For cleaning the glass of the oven door,do not use abrasive clean-

ers or sharp metal scrapers, these can scratch the surface or lead to the

glass being damaged.

- Never leave acidic substances (lemon juice, vinegar) on stainless

steel parts.

- Do not use a high pressure cleaner for cleaning the unit. The

baking pans may be washed in mild detergent.

This appliance is marked according to the European directive 2002/96/EC

on Waste Electrical and Electronic Equipment(WEEE).

By ensuring this product is disposed correctly, you will help

prevent potential negative consequences for the environ-

ment and human health,which could otherwise be caused by

inappropriate waste handling of this product. The symbol on

the product indicates that this product may not be treated as

household waste. Instead it shall be handed over to the appli-

cable collection point for the recycling of electrical and elec-

tronic equipment.Disposal must be carried out in accordance

with local environmental regulations for waste dispoasl.For

more detailed information about treatment, recovery and

recycling of this product, please contact your local city oce,

your household waste disposal service or the shop where you

purchased the product.

Định giá

Thông tin thêm về hướng dẫn này

Chúng tôi hiểu rằng thật tuyệt khi có sách hướng dẫn bằng giấy cho Malloca MOV-659 PGR Lò nướng của bạn. Bạn luôn có thể tải xuống hướng dẫn sử dụng từ trang web của chúng tôi và tự in. Nếu bạn muốn có sách hướng dẫn gốc, chúng tôi khuyên bạn nên liên hệ với Malloca. Họ có thể cung cấp hướng dẫn gốc. Bạn đang tìm kiếm hướng dẫn sử dụng Malloca MOV-659 PGR Lò nướng của mình bằng ngôn ngữ khác? Chọn ngôn ngữ ưa thích của bạn trên trang chủ của chúng tôi và tìm kiếm số kiểu máy để xem chúng tôi có sẵn ngôn ngữ đó không.

Thông số kỹ thuật

Tất cả hướng dẫn sử dụng cho Malloca Lò nướng
Thêm hướng dẫn sử dụng của Lò nướng

Câu hỏi thường gặp về Malloca MOV-659 PGR Lò nướng

Đội ngũ hỗ trợ của chúng tôi sẽ tìm kiếm thông tin sản phẩm hữu ích và trả lời cho những câu hỏi thường gặp. Nếu bạn nhận thấy có sự không chính xác trong các câu hỏi thường gặp của chúng tôi, hãy cho chúng tôi biết bằng cách dùng biểu mẫu liên hệ.

Những sảm phẩm tương tự

Hướng dẫn sử dụng

Malloca MOV-LX12 Lò nướng

Hướng dẫn sử dụng

Malloca MOV-606 AF Lò nướng

Hướng dẫn sử dụng

Malloca MOV-575 ECO Lò nướng

Hướng dẫn sử dụng

Malloca MOV-575 AMG Lò nướng

Hướng dẫn sử dụng

Malloca MOV-72 CB Lò nướng

Hướng dẫn sử dụng

Malloca MW35-IX03 Lò nướng

Hướng dẫn sử dụng

Malloca MOV-655EGT Lò nướng

Hướng dẫn sử dụng

Malloca MOV-656 ECO Lò nướng

Thể loại liên quan