Hướng dẫn sử dụng Electrolux E7SI1-80DB Bàn ủi

Hướng dẫn sử dụng

6 www.electrolux.com

CNT

CNS

KR

ID

TH

VN

EN

• This appliance is intended for domestic use only. The manufacturer cannot accept any liability for

possible damage caused by improper or incorrect use.

• This appliance is suitable to operate on both 50 and 60Hz.

• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance

must not be supplied through an external switching device, such as a timer, or connected to a circuit

that is regularly switched on and off by the utility.

GETTING STARTED AND OPERATING INSTRUCTIONS

1 Before first use. Remove all adhesive remains and gently rub with a dampened cloth. Rinse water

tank to remove foreign particles. Position the steam iron horizontally on the ironing-board or on a

heat resistant, secure surface at the same height as an ironing-board. Unwind and straighten the

power cord.

2 Fill the steam iron with water. Make sure, the plug is outside the power outlet. Raise the heel of

the iron, open the filling aperture cover (P). Use the water filling container provided (F), pour water

to maximum level (M). Close the cover (P). This product is appropriate for use with tap water. It is

recommended to use Electrolux AquaSense filtered water resp. a mix of 50% distilled, 50% tap water

if the tap water is particularly hard.

Always refill the water tank to MAX level using cold water.

Caution! Never operate the appliance without any water in the tank.

This product is equipped with a detachable Soft Water Activator (L),

We recommend to replace the

Soft Water Activator every 3 months.

.

Before starting ironing, please test your iron on an old towel to ensure that no residues inside the

iron are transferred to your garments. If necessary, wipe the soleplate with a slightly damp cloth.

3 Connect the steam iron to the mains supply. Select the ironing programme from the temperature

selector (E) on the steam iron. The light indicator (C) on the iron will pulsate when preheating. When

turned on for the first time, temporary vapours/odours may occur. The iron is equipped with an au-

to-steam function, which automatically adjusts the steam output to the selected ironing programme

supporting best ironing results.

4 As soon as the selected temperature has been reached, the lights indicator (C) is on permanently

and the headlight (D) turns on. Now the iron is ready to be used.

5 To activate the steam function, press and hold the steam on/off button (I). To stop the steam func-

tion, release the steam on/off button.

6 To use the continuous steam function, slide the steam button lock (R). To stop the continuous steam

function, slide the steam button lock.

7 For extra steam, press the steam jet button for one second.

Iron with extra steam: Press the steam buttons the same time for improved crease removal. When

releasing the buttons, use up the steam before putting the iron back on its heel.

Caution! Never release steam while the iron is standing on its heel.

Dry ironing: When not pressing steam buttons, the iron will be in dry mode.

8 Using

the spray mist. Pre-damp fabrics by pressing the spray button several times to release a fine

mist; ensure the tank is at least half full.

9 Steam hanging items.

The vertical steam function is ideal for curtains and suits. Hold the iron at a

distance of 10-20 cm and press the steam jet button.

10 The iron is equipped with 3-way auto-off function. If the iron is left unattended on soleplate or the

side, it automatically turns off after 30 seconds. If left unattended on the heel it automatically turns

off after 8 minutes. To turn it on again, move the iron. A short beep can be heard before the iron is

switched off by itself. To reactivate the iron, move it shortly and it is back to working mode.

11 To switch-off the steam iron, turn the temperature selector to position 0, a short beep can be heard

and all lights will turn off. Disconnect the mains plug. Never pull the supply cord. Instead, grasp the

plug and pull.

Empty the water tank and let the iron cool completely before storage.

12 Always store the iron on its heel

with the cord twisted loosley around the cable wrap facility. To

clean exterior surfaces, use damp soft cloth and wipe dry. Do not use any chemical solvents, as they

may damage the surface.

Định giá

Thông tin thêm về hướng dẫn này

Chúng tôi hiểu rằng thật tuyệt khi có sách hướng dẫn bằng giấy cho Electrolux E7SI1-80DB Bàn ủi của bạn. Bạn luôn có thể tải xuống hướng dẫn sử dụng từ trang web của chúng tôi và tự in. Nếu bạn muốn có sách hướng dẫn gốc, chúng tôi khuyên bạn nên liên hệ với Electrolux. Họ có thể cung cấp hướng dẫn gốc. Bạn đang tìm kiếm hướng dẫn sử dụng Electrolux E7SI1-80DB Bàn ủi của mình bằng ngôn ngữ khác? Chọn ngôn ngữ ưa thích của bạn trên trang chủ của chúng tôi và tìm kiếm số kiểu máy để xem chúng tôi có sẵn ngôn ngữ đó không.

Thông số kỹ thuật

Tất cả hướng dẫn sử dụng cho Electrolux Bàn ủi
Thêm hướng dẫn sử dụng của Bàn ủi

Câu hỏi thường gặp về Electrolux E7SI1-80DB Bàn ủi

Đội ngũ hỗ trợ của chúng tôi sẽ tìm kiếm thông tin sản phẩm hữu ích và trả lời cho những câu hỏi thường gặp. Nếu bạn nhận thấy có sự không chính xác trong các câu hỏi thường gặp của chúng tôi, hãy cho chúng tôi biết bằng cách dùng biểu mẫu liên hệ.

Những sảm phẩm tương tự

Hướng dẫn sử dụng

Electrolux E8SI2-8OG Renew 800 Bàn ủi

Hướng dẫn sử dụng

Electrolux E3SI1-2LG Care 300 Bàn ủi

Hướng dẫn sử dụng

Electrolux ESI6157 UltraSteam Precision Bàn ủi

Hướng dẫn sử dụng

Electrolux ESI5226 ErgoSteam Bàn ủi

Hướng dẫn sử dụng

Electrolux E6SI3-62MN Refine 600 Bàn ủi

Hướng dẫn sử dụng

Electrolux E6ST1-8EG Refine 600 Bàn ủi

Hướng dẫn sử dụng

Electrolux EDI1004 EasyLine Bàn ủi

Hướng dẫn sử dụng

Electrolux EDI1014 EasyLine Bàn ủi

Thể loại liên quan